660Ampitt

When your cars tires go flat, this kind of situation should not be a burden for you. After all, most cars already come with spare tires and a jack, along with other odds and ends that would help you facilitate changing your tires in no time at all.

To change a tire or a couple of tires, park your car first in an area where the ground is level. Do not forget to put on the parking brake. If your car is equipped with a manual transmission system, place it in gear. Turn off your engine for there is no need for it to be turned on and running. However, if you have parked in an area where there is an incline, put a huge rock or a wheel chock beneath the opposing wheel so that you would not find your car rolling down the incline.

This is now the time to take out your spare tire as well as a tire iron and the jack. If you have to remove a hubcap, do such. Then, loosen the lug nuts on your wheel. Do this before you place the jack in your car. Make sure that you loosen each and every lug nut that connects your tire to the wheel. But do not unscrew them completely. As long as the lug nuts are loosened up and not unscrewed completely, that would do.

Then, start jacking up your vehicle. To be safe, check your car owners manual for the specifics on the location as per where you should put your jack. And when you jack your car, make sure that you raise your car a little higher so that you can not only remove the old flat tire but you can also put in the new tire.

When the car has been jacked up fine, you can now unscrew completely the lug nuts. And after this, you can remove the flat tire. Get out your new tire and put it where the old one was. Then, place back the lug nuts and tighten them up.

After this, you can now lower the jack and remove it. If you have a hubcap, you can now put it back on.

Flat tires are one of the most common troubles that car owners and vehicle drivers encounter. This happens mostly when the owner or the driver do not give much attention to the cars tires. Keeping your cool when your cars tire runs flat would help you out a lot. After all, the situation could be remedied in no time at all.

First off, you should turn your cars flashers on as you slowly pull of the road. Make sure that you park your car in an area which is away from any traffic. But it is also important that you are visible from the road and not secluded. If possible, try to find an area that is flat and level. Parking on inclines could make changing your flat tire quite a challenge. When you have already found your spot and have safely parked your car, make sure that you do inform other motorists that you are in some kind of car trouble. Put up your flares.

Your car could actually roll while you are trying to fix the flat tire so it is important that you put on the hand brake of your vehicle. Also, put the transmission of your vehicle in park or in gear. And when you have done so, start collecting the items you would need to change the tire the spare tire, a leverage pipe, the jack, and a lug nut wrench. And before you start tinkering with the flat tire, place a large rock or a huge piece of wood beneath all the other wheels so that your car would certainly not roll.

Loosen the lug nuts on your flat tire using the lug nut wrench. This should be done by turning the tool counterclockwise. Loosen them but do not completely remove them. And when all are loose, then is the time to jack your car up. Make sure that the car is elevated slightly greater so that the new and full tire could fit in when you put it in. Then remove the loosened lug nuts. You can now remove the flat tire and put the new spare on. Tighten the lug nuts and make sure that everything is tight. You can put down the jack and certainly be on your way.